Re: Spoke Tension of Rear Wheel

Tim McNamara Wrote: 
> Welcome to the dilemma of dished wheels. ...If you've got 120 KgF on the
> right and 72 KgF on the left, that's as good as it gets.

I've toyed with the idea of lacing a 32H hub to a 24H rim using only
every 2nd spoke hole on the NDS and every hole on the DS.
Assuming I'd be able to find a 32H rim where all the spoke holes are
drilled dead center and a hub geometry that'd give around 50% spoke
tension for a traditional lace that'd be spot on.

There's a guy on another forum who's been looking high and low for a
27H rim in order to be able to do the same thing using a 36H hub.

Following the same general theory it should be possible to build
something nice with a 48H hub and a 36H rim as well.

Anyone selling rim blanks?


-- 
dabac